How does the manufacturer repair the combustion waste gas treatment device?
时间:2021-12-17 浏览次数: 1195 作者: 加科

   The purification of waste gas burner refers to that the waste gas collected in the scrubbing tower is washed by spraying, and passes through the spraying layer and demisting layer during the period; If the odor concentration is high, in order to enhance the deodorization effect, an activated carbon adsorption tower is usually added at the end of the scrubbing tower to adsorb the waste gas, and the filtered and purified waste gas reaches the emission specification. In terms of the data characteristics of the photocatalytic oxygen purifier, according to the materials provided by the Korean Institute of environment, under laboratory conditions, when the photolysis process is selected to strictly control the intake concentration, gas volume and other conditions for a single organic waste gas substance or odor gas substance, the measured photolysis purification rate can reach more than when the power of the photolysis equipment is sufficient. At the temperature of, the accumulated molecules are decomposed into carbon dioxide and water. The burned flue gas continues to be in the ceramic brick through the heat storage ceramic, preheat the organic waste gas, and then discharge. Outdoor, the motor of water pump fan shall be manufactured with rain cover to prevent the motor from moisture.

   The waste gas management of catalytic combustion in the plastic plant is ground into pulverized coal with a certain fineness in the coal mill, which is carried by a part of hot air from the air preheater and injected into the furnace through the burner. When the gas pressure exceeds this scale, the operation of the burner shall be determined. Therefore, it is necessary to purify and remove such compounds before entering the waste gas treatment equipment. The printing waste gas treatment equipment gasifies the highly activated plant liquid through high-pressure gasification to produce chemical adsorption reaction with organic molecules and peculiar smell in the printing waste gas, effectively remove the peculiar smell and discharge up to the standard. Small and effective, we sincerely recruit agents. New and old customers are welcome to discuss and join us.

咨询热线
  • 座机:0531-83659330
  • 传真:0531-83382689
  • 邮箱:admin@gaco.cc
  • 总部地址:山东济南市章丘区宁石路9号
最新动态
从达标到卓越,点亮医药制造绿色新名片
从达标到卓越,点亮医药制造绿色新名片

加科助力长春生物低氮改造圆满完成 5 台锅炉绿色升级近日,加科(山东)智能装备有限公司顺利完成长春生物制品研究所有···

+MORE
292026-03
加科助力君乐宝低氮改造获新助力
加科助力君乐宝低氮改造获新助力

近日,加科燃烧器圆满完成江苏君乐宝乳业有限公司2台低氮燃烧器项目的安装与调试工作,为乳业生产的高效、环保运行注入···

+MORE
292025-07
联系我们

24小时竭诚为您服务

15563365608(微信同号)

地址:山东省济南市章丘区宁石路9号

邮箱:admin@gaco.cc

电话
0531-83659330
微信
微信二位码
留言
返回顶部
加科(山东)智能装备有限公司 备案号:鲁ICP备17025986号-5
首页
产品
咨询
应用
服务