The combustion head of the biogas combustion torch adopts a unique structure, which enables the torch to generate a strong ejector force during combustion and introduce the surrounding combustion supporting air into the combustion chamber. Even the combustion supporting fan equipped with the torch with large processing capacity is much smaller than that of other brands, saving users a lot of operating costs in power, It also avoids the noise pollution caused by the operation of the fan.

   The combustion head is made of high temperature resistant stainless steel. Due to the special structure of the combustion head, the combustion supporting air injected will cool the combustion head during combustion, greatly reducing the burning loss of the flame to the combustion head. High temperature resistant stainless steel can not only adapt to the high temperature generated by combustion, but also prevent the damage to the combustion head caused by the corrosion of gas.

   At the same time, this structure has good wind and rain proof effect. It can burn very stably even in strong wind and heavy rain. There will be no ponding or flameout in the combustion cylinder. The biogas combustion torch is equipped with intelligent ignition control box, and the standard functions can be realized: gas holder position ignition, pressure automatic ignition, remote central control ignition, on-site manual ignition and on-site emergency stop.

   And transmitting operation signals such as flare combustion, valve opening and fault to the upper central control room; The fault signal can be removed on site or restarted remotely. One ignition command includes 6 ignition attempts. During normal combustion, if the flame goes out, the flare can automatically identify and start the next ignition cycle until the fault signal is given.